close
close

How To Measure Chainsaw Chain Stihl

How To Measure Chainsaw Chain Stihl

How To Measure Chainsaw Chain Stihl. For example if it is indicated on the notice or the box of the chain of chainsaw that the guide measures 45cm, it is that the guide makes a cut of 45cm, in reality the. Typically, chainsaw guide rail size is indicated in inches, sometimes in centimeters.

How To Measure Chainsaw Chain StihlHow To Measure Chainsaw Chain Stihl
Pin by Jud Boyd on Chainsaws Chainsaw mill, Chainsaw chains, Chainsaw from www.pinterest.ca

Using a tape measure to try and find the thickness of a drive link would likely give you an inaccurate result. Measure from the tip of the bar to where it enters the body for the cutting length. 3/8″ pitch chains are the most common pitch size, and 3/8.

Extend The Tape Until You Reach The Tip Of The Bar And Record Your Measurement.

The low profile chain is one of the most popular specialty chains. Measure the saw from the front to the tip to find the length of the bar. Place one end of the tape measure at the point where the motor casing ends and the metal blade begins.

3/8″ Pitch Chains Are The Most Common Pitch Size, And 3/8.

The sizes break down like this: However, most chainsaw files are designed to be either 5/32 inch or 7/32 inch. Stihl chain size is also marked on the chains:

Stihl’s Green And Yellow Color Code System Serves To Identify Stihl Bars And Chains With Different Kickback Reduction Characteristics.

The low profile chain is one of the most popular specialty chains. Make sure the bar groove on your chainsaw is clean. A 5/32 inch file is generally used for a chainsaw with a pitch of 0.325 inches, while a 7/32 inch file is usually used for a chainsaw with a pitch of 0.404 inches.

Using A Tape Measure To Try And Find The Thickness Of A Drive Link Would Likely Give You An Inaccurate Result.

Start the end of a tape measure where the bar goes inside the main chainsaw body. The size of the chain saw file you need depends on the size of the chain that you’re using. Chainsaw chains are available in.

See also  How To Calculate The Value Of X In Angles References

A Chain Marketing Number Will Include The Following Information.

As for the drive link, the number can be something from 44 to 55. Instead, you should use a dial calliper, which can help to measure the thickness of any material with pinpoint accuracy. Then, grab a quarter, a penny, and a dime.